analysis of the tractor gearbox assembly line balancing to improve network _ _ behalf of the thesis（拖拉机变速箱装配线平衡的分析来提高网络代表论文_ _）.doc

Analysis of the tractor gearbox assembly line balancing to improve network _ _ behalf of the thesis Write papers network: Paper Keywords: assembly line balancing procedures, improve management Abstract: The factor analysis method and quantitative measurement of the assembly line balancing problems, propose improvements. Focused on the key reasons for restricting the production capacity, an implementation of the proposed evaluation method a rate assembly line balancing method for use in small wheeled tractors gearbox assembly line, to get good results. studies have shown that the production process to help achieve a balanced assembly line and scientific management. Assembly line work between the various processes related to the amount of average production process or directly affect the overall efficiency of the bottleneck analysis process, the process of production line is the average production capacity production line to improve the efficiency of the key. Bearing a tractor gearbox assembly line design and production program on the pressure of 8 million units / year (single shift), design and production rhythm of 1.5min, to meet 18.37.101 (standard model) and 20.37.101 (plus wide) two kinds of gearbox assembly operations. Early in the production line, close to 300 day production tasks can not fulfill the plan. Some of the process, there was serious pressure line, off-line phenomenon, and some of the processes of production capacity is also relatively abundant, the presence of the bottleneck process to further increase production tasks, had to rely on a lot of work longer hours to complete, and dampen the enthusiasm of staff, the production and management more difficult. Determined by analyzing the production process does not affect the production line capacity balance is a major factor: the theory and use of production line balancing, and re-allocation process, which established a reasonable production cycle is to solve the key problem of product