堆取料机（Stacker reclaimer）.docVIP

堆取料机（Stacker reclaimer） Stacker reclaimer: I. overview The selection of coal yard machinery is affected by the shape of coal yard. At present, the coal yard of coal-fired power plants in China can be divided into two types: strip coal yard and circular coal yard according to their layout. Most power plants use strip coal yards, and a few power plants are limited by topographic conditions, using a circular coal yard. The strip coal yard mostly uses the loading and unloading bridge, the bucket wheel stacker reclaimer and the gate stacker reclaimer; the circular coal yard uses the circular stacker reclaimer. Bucket wheel stacker reclaimer is a large continuous material handling and stacking of coal yard machinery. At the end of 60s Chinas power plants began to use the bucket wheel reclaimer, in the following 20 years, large and medium-sized power plants to the coal machinery, make coal yard function has been further developed, the degree of mechanization of coal has increased. Two, structure Bucket wheel stacker reclaimer, also known as cantilever stacker reclaimer. It is a mechanical stacker, which is a kind of high efficiency mechanical digging and stockpiling of coal, ore, sand and other loose material. It is not only applicable to power plants, but also in docks and harbors. Most of the docks and ports for transporting coal and loose materials use bucket wheel stacker reclaimer. It has bucket wheels for continuous operation. And there are rotating, pitching, walking and other institutions to form a complete working system. High efficiency, advanced structure and low investment. This section takes DQ5030 bucket wheel stacker reclaimer as an example. Bucket wheel stacker reclaimer consists of metal structure, tail car, cantilever belt conveyor, walking mechanism, bucket wheel and bucket wheel drive device, pitch and cantilever slewing mechanism, as shown in the following figure. 1. metal framework The frame, the post, the boom and the tail of the bucket wheel stacker