气体流量标准装置（Gas flow standard device）.docVIP

气体流量标准装置（Gas flow standard device） Shandong Institute of metrology 125000m3/h gas flow standard device technical scheme First, the main technical indicators 1, device type: negative pressure method, critical flow, gas flow standard device. 2, the seized table type: speed type (turbine flowmeter, vortex precession flowmeter, vortex flowmeter, ultrasonic flowmeter, shunt type steam flow meter), volume (flowmeter and wet gas flowmeter, industrial diaphragm gas meter), mass flowmeter (thermal gas mass flowmeter, Cory Oliver flowmeter etc.), differential pressure type gas flow meter, gas meter, gas meter calibration industry can meet the G10 ~ G65 diaphragm gas meter. The sealing test can be carried out. 3, the table size: 150, 200, 250, 300, 350, 400, 600, 500, eight specifications. 4, verification platform: Nine verification stations, DN150, DN200, DN250, DN300, DN350, DN400, DN500, DN600, and an industrial gas meter calibration station. 5, flow range: (1~25000) m3/h (working condition). 6. Unit working pressure: negative pressure (near 101.325Kpa) 7, pressure fluctuations: 20Pa. 8, nozzle uncertainty: better than 0.15% (calibration certificate of China Metrology Institute) 9. Absolute pressure transmitter: + 0.075% 10 、 temperature transmitter: + 0.2% 11, timer, meets the requirements of the regulations of 1 * 10, and individually configured by Taiwan Weida timing plate TMC10, 8M crystal. 12. Comprehensive uncertainty of equipment: U=0.2% ~ 0.25%, k = 2 Two, the main standards of reference 1) ISO9300:1990 gas flow measurement using a critical flow Venturi nozzle 2) and JJG643-2003 standard metrological verification procedure of standard meter method for Flow Standard Installations 3) JJG620-2008 metrological verification regulation of critical flow meter 4) GB/T 2624-2003, flow measurement, throttling devices, orifice plates, nozzles, and Venturi tubes to measure fluid flow in a full circle 5) and JJG198-1994 the metrological verification regulation of speed flow mete