- 2
- 0
- 约3.02万字
- 约 30页
- 2017-09-15 发布于河南
- 举报
气化装置上岗考试题(Examination questions of gasification unit)
气化装置上岗考试题(Examination questions of gasification unit)
Gas production workshop; gasification unit; certificate; examination question bank
A total of 136, fill in the blanks, 60 questions, choose 24 questions, 12 questions, 40 questions and answers
First, fill in the blanks (60)
1, gasifier drive is through (PIC-606 (A-H) 035) valve to control the lifting pressure.
2. The gasifier pressure is raised to (0.3MPa) (g), and the gas pressure control valve is started automatically.
3, after the gasifier (steam heating up), the pressure of the gasifier is raised to 0.3MPa (g) by means of (PIC-606 (A-H) 035) valve.
4. The air ignition has been successful and stable. After 30 minutes, the pressure of the gasifier will be raised to (0.4MPa) (g).
5, in the steam and air operation stage, the content of CO2 in crude gas should be maintained at about (18)%. The content of O2 should be less than (0.4)%.
6, in the steam and air operation stage, the temperature of the vaporization agent should be maintained at about (180) C.
7, when the gasifier ignition, first through (air), and then through (steam)
8, gasification furnace start-up stage, generally need at least steam heating (3) hours, air operation (3-4) hours.
9. The temperature of the gasifier outlet should be greater than (100) after the end of the gasifier steam temperature.
10, gasification furnace steam heating stage, the steam flow rate is (20000) kg/h
11, gasifier ignition stage, just through the air, it should be adjusted to its flow rate (1500) Nm3/h.
12, after the ignition of the gasifier is successful, the air flow rate shall be adjusted to (3000-4000) Nm3/h.
13, when the gasifier has oxygen cutting conditions, it must be reported to the general tune for the purpose of obtaining approval of more steam and oxygen.
14, when the gasifier runs from steam and air to the steam and oxygen, is it the first to return the steam or the air? (steam should be returned first).
15, when the gasifier runs from steam and air to steam an
您可能关注的文档
- 模具表面处理(Die surface treatment).doc
- 模具维修(Die maintenance).doc
- 模具的加热、保温与冷却(Mold heating, insulation and cooling).doc
- 模具设计(mould design).doc
- 模型修改器(Model modifier).doc
- 模具设计人员必看关乎就业(Mold designers must see jobs).doc
- 模具设计专业术语(Terminology for die design).doc
- 模式识别(pattern recognition).doc
- 模型制作的基本技巧(入门篇)(Basic skills of model making (Introduction)).doc
- 榉木椐木(According to beech wood).doc
- 气流干燥技术研究现状与发展趋势(Research status and development trend of air drying technology).doc
- 气扳机气控储能装置的工作原理(The working principle of gas controlled energy storage device with gas trigger).doc
- 气相色谱一质谱联用法测定聚氯乙烯塑料中 7种增塑剂(Determination of 7 plasticizers in polyvinyl chloride plastics by gas chromatography mass spectrometry).doc
- 气瓶的安全技术 定稿(Safety technology finalization of gas cylinders).doc
- 气化车间实习总结(Summary of practice in gasification workshop).doc
- 气管插管操作(Endotracheal intubation).doc
- 气硬性胶凝材料(air-hardening binding material).doc
- 气色形态手诊(Color configuration value).doc
- 气虚体质在进行运动养生保健时要注意几点(Qi deficiency constitution in sports, health care should pay attention to several points).doc
- 气血不足(Insufficiency of Qi and blood).doc
原创力文档

文档评论(0)