阐释外文翻译.docVIP

　　阐释外文翻译 阐释外文翻译___双闭环直流调速系统的说明 导读：工学部专业班级学号姓名指导教师负责教师自动化毕业设计（外文翻译）DoubleLoopDCSpeedControlSystemDescriptionⅠ.systemanalysisandsynthesis1．Analysis（1）Inthespeedandcurrentdualclosed-loopspeedcontrolsystem,inordertochangethemotorspeed, Description 工 学 部 专 业 班 级 学 号 姓 名 指导教师 负责教师 自动化 毕业设计（外文翻译） Double Loop DC Speed Control System Description Ⅰ.system analysis and synthesis 1．Analysis （1）In the speed and current dual closed-loop speed control system, in order to change the motor speed, eters should be regulating Change speed regulator Kn magnification agnification factor Ks otors stall current system should adjust the parameters of otor speed, change speed regulator Kn magnification and poagnification factor Ks, stable otors stall current, only need to change the same value given Uim * and feedback coefficient, because the stability, Uim * = Idm, can be dra the type (2) Speed, the current double closed-loop speed control system ber A: The 3 4 5 6 7 8 9 10 阐释外文翻译___双闭环直流调速系统的说明 导读：lsystemisnotstaticpoorA:Speedregulatorintegralsystem,toachievenon-staticerrorisduetothecharacteristicsofintegralcontrolregulator,thatis,theaccumulationofpointsandtheroleofmemory.1毕业设计（外文翻译12345678910 speed and current dual closed-loop speed control system ula n = Un = Un *, n = n; Uim * = Idm, Idm = Idl. (3) In the speed and current dual closed-loop speed control system, the t is running re-enter the steady-state, the current regulator is the input bias voltage to zero is running , 0, rate of increase in n, after re-entering the steady-state , that is, Id = Idl, then, = Uim *- Idl 0, are no longer changes, changes in rotational speed n is no longer, but at this time than the rotational speed n at the time of the feedback line speed to break big. (4) , to achieve non-static error is due to the characteristics of integral control regulator, that is, the accumulation of points and the role of memory. 1 毕业设计（外文翻译 3 4 5 6 7 8 9 10 阐释外文翻译___双闭环直流调速系统的说明 导读：apidly,thec