外文翻译原文-基于PLC的电梯控制系统的设计和实现.pdfVIP

2008 Workshop on Power Electronics and Intelligent Transportation System Design and Practice of an Elevator Control System Based on PLC 1, 2 1 1 Xiaoling Yang , Qunxiong Zhu , Hong Xu 1 College of Information Science Technology, Beijing University of Chemical Technology, Beijing 100029, China 2 Automation College of Beijing Union University,Beijing,100101, China yxl_lmy@ , zhuqx@, Abstract The electric power driving system includes: the This paper describes the development of 2 nine-storey elevator car, the traction motor, door motor, brake elevators control system for a residential building. The mechanism and relevant switch circuits. control system adopts PLC as controller, and uses a Here we adopted a new type of LC series AC parallel connection dispatching rule based on minimum contactors to replace the old ones, and used PLC’s waiting time to run 2 elevators in parallel mode. The contacts to substitute the plenty of intermediate relays. paper gives the basic structure, control principle and The circuits of traction motor are reserved. Thus the realization method of the PLC control system in detail. original control cabinet’s disadvantages, such as