超声振动条件下外加载荷对车刀的能量分布及磨损状况影响.doc

超声振动条件下外加载荷对车刀的能量分布及磨损状况的影响 摘要 关键词：超声振动Under the condition of ultrasonic vibration，how are the applied loadings affect energy distribution and wear of cutting tool AbstractWith the development of science and technology, in the field of machining, the machining precision of the workpiece and the surface quality of the demand is higher and higher, people focus on how to improve the manufacturing precision of the product.Made a lot of people through research and implement of precision and ultra precision machining of the parts.However, some precision and ultra precision machine tool is very expensive,which limit their use severely, therefore people through exploring the new processing technology to achieve precision machiningof machine parts. Presently ,we must study the Advanced processing technology, it is of great significance for the national industry and the development of human beings.Ultrasonic vibration compound processing technology is an advanced processing technology,which can effectively realize the parts precision machining.Process technology is advanced, cutting effect is also very good, but it faced with some problems, the stress of the cutting tool is one of them.This article through to establishes the model of the ultrasonic vibration cutting about cutting force calculation, analyzing the process of cutting tool vibration cutting and loading load impact on energy distribution of turning tool.At the same time, using the ANSYS —a finite element analysis software analyzes the transient dynamic response of the tool under the action of dynamic load, it is concluded that the average stress of coating tool is far less than the static load conditions in a cycle of the periodic dynamic load, cutting too.Finally ,we do the cutting experiment research , studying the ordinary uncoated tool and coated tool wear in the same conditions, it is concluded that the coating tool compared with ordinary tool is more wear-resisting, higher machining precision.And I analyzed