带式输送机监测系统设计.doc

带式输送机监测系统 摘 要：带式输送机由其性能的优越性被广泛应用于矿山、港口、工厂生产等领域，其特点是，出现故障，本Design of Monitoring System for Belt Conveyor Abstract：The advantages of belt conveyor by its performance is widely used in mining, port, factory production and other fields, parting from other transportation machine’ characteristics are by long transport distance, fast transport and large transport capacity, and it can continuous transportation even if can carry on for many kinds of materials. Belt conveyer as the continuous working equipment, if it once appeared skid, deviation, longitudinal tearing fault, Enterprises will be forced to stop production and production efficiency is greatly reduced, under serious circumstances, it can cause serious casualties and machines scrapped. Therefore, in order to reduce unnecessary economic losses and casualties, it is very important to study the monitoring system of belt conveyor. The purpose and significance of fault diagnosis for belt conveyors are described in this design, and the basic structure and working principle of belt conveyor are expounded, In addition, the failure mechanism of belt conveyor is described. The new monitoring principles and methods are proposed. Finally, The overall scheme of the monitoring system was designed and completed, In the aspect of hardware，I choose the right sensor according to the actual situation and the monitoring principle. ?By comparison and analysis, the fault signal is collected by photoelectric sensor. Then, by the conveyor structure and monitoring conditions, the installation position of sensor is determined. The signals are collected initially by the sensor, next the data is afferent data acquisition card, then it can be received which IPC is easy to accept. Finally, The system can achieve fault alarm, real-time display, generate reports, print, reports storage purposes by Kingview software. Belt conveyor monitoring system that is designed in this paper is based on the Kingview software. It was found that the informat