The Application of Object-oriented Technology to Coil Temperature Control in Hot Strip Mill论文.pdfVIP

The Application of Object-oriented Technology to Coil Temperature Control in Hot Strip Mill ·1 · The Application of Object-oriented Technology to Coil Temperature Control in Hot Strip Mill Shen Yuchun (Process Information Section Electrical Control Department, China Steel Corporation, Taiwan, China) Abstract Coil temperature control always plays a very important role to coil quality in Hot Strip Mill. Due to the limitation of computer capability in the past, it is hard to get the detail coil processing history of each sample point on run out table. Now, the modern computer technology has already advanced enough to apply Object Oriented Design on Coil temperature control. This not only makes past impossible possible but also raises various applications. The applied Object Oriented Design contains from object function analysis to the way objects chain created and reflected to each sample object on coil, to make the coil temperature prediction hit the target. Key words hot strip mill, coil temperature control, object orient design 1 Introduction Hot strip mill is a process line which turns slab into coil. During the process, slab will be rolled、shaped and temperature-controlled in order to meet client required coil specification. Among all the temperature might get during the process, the most important temperature need to be controlled is coil temperature. Because finishing mill delivery temperature and velocity are already measured and controlled for steel grain size purpose, different coil temperature target indirectly decides cooling rate which is the key to steel phase transformation. In order to make entire coil hit the coil temperature target, the whole length of coil will be virtu