超薄壁大径厚比屏蔽套反旋模拟分析.PDFVIP

26 5 Vo.l 26No. 5 2010 10 M achineDesign and Research Oct. , 2010 文章编号: 1006-2343( 2010) 05-094-04 超薄壁大径厚比屏蔽套反旋模拟分析 , , , , ( 中南大学 机电工程学院, 长 410083, E-mai:l yangxinquangok@ 126. com) : 建立了超薄壁大径厚比屏蔽套反旋工艺弹塑性有限元分析的力学模型, 利用大型有限元分析软 件MSC M arc进行了仿真分析, 研究了旋轮接触区金属的塑性流动场以及应力应变的分布规律, 从而为实际 加工超薄壁大径厚比屏蔽套时提供理论指导 : ; ; ; ; : TG302 : A n c Sim ulation Analysis on Backward Spinning of U tra . Th in-walled Sh ield SleeveW ith H igh Ratio of D iam eter/Thickness g LIX in-he, YANG X in-quan, WANG Yan-fen, DENG Ru,i HE Ju r ( School ofM echaelectronicEngineering, Centural SouthUniversity, Changsha 410083, China) 库 Abstract: In this paper, a elasto-plasticFEM modelwas constructed forsleevebackward spinning process ofU tra 例 o thin-walled shield sleevew ith high ratio of diameter/thickness, and the large-scale FEM analysis softwareMSC. M arc . is used for a simulation analysis. Themetal plastic flow field and the distribution of stress and strain of the spinning 案 wheel contact area are studied, and the theoretical guidance for the actual processing of the ltra thin-walled shield E o A e sleevewith high ratio of diameter/thickness is provi