博科产品配置解析-V0.5.pptxVIP

博科产品配置解析朱 顼数据网络顾问日立数据系统（中国）有限公司 日 程博科产品配置最佳实践博科产品配置指南博科软件许可简介博科软件许可简介博科产品配置最佳实践博科产品配置指南 软件许可类型临时永久“所有软件许可需要基于设备的WWN授权” 临行许可Adaptive NetworkingAdvanced Performance MonitoringHigh Performance ExtensionExtended FabricFull Fabric(E_Port) ISL Trunking10GbE FCIP/10G Fibre ChannelServer Application OptimizationIntegrated RoutingAdvanced ExtensionEnterprise ICLFabric Watch 以FOS 7.0.1为例FICON Management Server(CUP)Advanced FICON Acceleration 永久许可Ports On DemandExtended FabricAdvanced ExtensionIntegrated RoutingICL POD7800 Upgrade以FOS 7.0.1为例ICL 16-Link or Inter Chassis LinksInter Switch Link(ISL) and Inter Chasis Link(ICL)Routing and ExtensionPorts on Demand for FC SwitchEnterprise ICL(EICL)ISL TrunkingFull Fabric(E_Port)ICL 8-Link 永久许可…续DataFort CompatibilityEnhanced Group Management Encryption Performance UpgradeFICON Management Server(CUP)Monitoring and ManagementServer Application Optimization10GbE FCIP/10G Fibre ChannelAdaptive Networking with QoSFabric Watch FICON以FOS 7.0.1为例Advanced Accelerator for FICON for DCX Advanced Accelerator for FICON for 7800 Advanced Performance MonitoringEncryption10GbE and 10G FCPorts On Demand 软件许可解读 - 通过增加额外的端口来扩展SAN 架构√适用：300, 5100, 5300, 6505, 6510Ports on Demand for FC Switch适用：7800特性描述基本配置升级后配置FC端口数量416GbE端口数量2610GbE端口数量00FCIP隧道数量28Tape Pipelining read/write over FCIP隧道NoYesCircuit(电路)/隧道267800 Upgrade 软件许可解读 - Routing and Extension 防止Fabric进行合并产 无法预测的风险 实现Fabric间的路由 在FC距离超过10公里后增 加缓冲信用(Buffer Credit)数量，延伸同城容 灾距离 购买10GbE/10G FC后不 需要，保护客户投资√适用：8510-8, 8510-4, 6510, DCX, DCX-4S, 5300, 5100, 7800或加密交换机(300不适用)√Integrated Routing适用：全系列光纤交换机的FC端口√√Extended Fabric 软件许可解读 - Routing and Extension 聚合多运营商链路，提供 冗余和故障转移(FCIP Trunking) 为不同容灾流量提供4种 QoS级别(Class-F，高，中 和低) 为不同容灾流量提供速率限 制 (Adaptive Rate Limiting)适用：7800,在8510-8,8510-4,DCX,DCX-4S上的FX8-24端口板√Advanced Extension√√ISL and ICL 软件许可解读 - 激活E_Port，与其它交换机进行 级联 实现DCX之间全部的带宽(512Gbps)√√适用：全系列光纤交换机适用：300(310)适用：DCX 绑定多条物理链路至一条逻辑链 路 充分利用链路，减少流量拥塞 提供故障转移和链路冗余√√ICL 16-Link or Inter C