毕业论文（设计）台灯底座外壳成型工艺与模具设计.docVIP

摘 要 本次的毕业设计课题是关于台灯底座外壳的注射模具设计，其主要内容包括塑件结构和材料的分析；注射机的选择；模具结构设计；成型零部件的设计；脱模机构设计；浇注系统和冷却系统设计等。首先分析塑件的成型工艺特点，包括材料性能、成型特性与条件、型腔型芯结构工艺性，根据塑件结构形状尺寸及生产批量选择注射机的型号与技术参数和初步确定采用一模两腔，单分型面生产方式。然后确定注塑模的分型面，重点介绍了浇注系统设计、成型零件的设计与计算、脱模机构设计及冷却系统的设计以及标准模架选用标准。最后对注射机的技术参数进行相关校核，并绘制模具结构图、完成模具总装配图。在本次设计过程中，使用Moldflow软件模拟注射成型过程，通过模流分析，可以优化模具的设计。通过本次毕设，对注射模具的设计和相关的行业软件又有进一步的认识，了解模具的结构及其工作原理。 关键词：台灯底座外壳；注塑模具；零部件设计；Moldflow The mould injection design of charger shell Student:CHEN Yao-Gang Teacher:YANG Hui Abstract：The graduation design topic is a lamp base shell injection mold design, the main contents are plastic analysis of structures and materials; the choice of injection machine; mold structure design; design of molding parts; demoulding mechanism design; gating system and cooling system design. First, analysis of the plastic parts molding process, including material properties, forming characteristics and conditions, the cavity core structure process of, according to the plastic parts of the structure shape and size and production batch select injection machine models and technical parameters and identified using a two cavity mold, single parting surface mode of production. Then determine the injection mold parting surface and cavity number and focuses on the introduction of design and calculation of the gating system design, molding parts, demoulding mechanism design and cooling system design. Finally, selecting the appropriate standard mold, also the technical parameters of injection molding machine were checked, and drawing mould structure drawing, mold assembly drawing. In the design process, using Moldflow software to simulate the process of injection molding, by mold flow analysis, can optimize the mould design.Through this complete set of injection mold design and software-related industries have a better understanding, to understand the structure and how it works mold. Key words: lamp base shell; injection mold; parts design; Moldflow 目录 摘 要 I Abstract：. II 1 绪论 1