丝印喷涂等硬度测试.doc

REVISIONS REV ITEM STATUS DATE AUTHOR DESCRIPTION PAGES APPR Notes: Draft version Otto Sun 16/Jun.2011 CONFIDENTIAL AND PROPRIETARY THE INFORMATION CONTAINED HEREIN IS THE CONFIDENTIAL AND THE EXCLUSIVE PROPERTY OF EURO-PRO OPERATING LLC. THIS DOCUMENT, AND THE INFORMATION CONTAINED HEREIN, SHALL NOT BE COPIED, REPRODUCED, PUBLISHED, DISPLAYED OR DISTRIBUTED, IN WHOLE OR IN PART, IN ANY MEDIUM, BY ANY MEANS, FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN CONSENT OF EURO-PRO OPERATING LLC. IN ADDITION, THIS DOCUMENT AND ALL COPIES MUST BE RETURNED TO EURO-PRO OPERATING LLC OR DESTROYED UPON REQUEST OF EURO-PRO OPERATING LLC. FAILURE TO MEET THE ABOVE NOTICE WILL MEAN THAT EURO-PRO OPERATING LLC HAS THE LEGAL RIGHT TO TAKE ACTION AGAINST THOSE IN VIOLATION. ? EURO-PRO OPERATING LLC 2007 ALL RIGHTS RESERVED TPGP-00019-Paint and Graphics Hardness Test Euro-Pro Operating LLC  TABLE OF CONTENTS 1.0 TITLE 3 2.0 OBJECTIVE 3 3.0 REFERENCE DOCUMENTS 3 4.0 DEFINITIONS 3 5.0 TEST SPECIMEN 3 6.0 TEST EQUIPMENT USED 3 7.0 TEST PROCEDURE 4 7.1 Test Criteria 4 7.2 Test Procedure 4 8.0 DATA REDUCTION 4 8.1 Summary of Recorded Data 5 TITLE Paint and Graphics Hardness Test OBJECTIVE: The test is used to measure the relative hardness of an applied paint film or graphic or coating based upon the ability of the film to resist penetration and gouging by pencil leads of varying hardness. REFERENCE DOCUMENTS Control Number Description N/A Individual Product Specification Whitford Test Method 131A DEFINITIONS DQTP Design Qualification Test Plan TEST SPECIMEN Final color and material parts and final finished surface or completed new assembled products are required to be used for this test. TEST EQUIPMENT USED The following test equipment or its equivalent should be used to perform