化学方法退除钛合金阳极氧化膜的对比.pdfVIP

Rare Metal Materials and Engineering Volume 41, Issue 8, August 2012 Online English edition of the Chinese language journal Cite this article as: Rare Metal Materials and Engineering, 2012, 41(8): 1331-1335. ARTICLE Comparative Study on Chemical Stripping of Titanium Oxide Films Formed on Titanium Alloy Liu Jianhua, Wu Guolong, Li Songmei, Yu Mei, Yi Junlan, Wu Liang Beihang University, Beijing 100191, China Abstract: Two methods for stripping of anodic oxide films formed on titanium alloys Ti-6.5Al-1Mo-1V-2Zr without hydrofluoric acid or fluoride were studied: using hydrogen peroxide with sulfuric acid and using hydrogen peroxide with sodium hydroxide. The morphologies and microstructures of the oxide films before and after stripping were compared by SEM and Raman spectroscopy. The surface topography and roughness of the samples were detected by AFM. The results show that the oxide films can be stripped both by the two methods and the stripping process is affected by the microstructure of the matrix material obviously. β or platelet α phases are more affected by the solution while globular α phase is preferentially dissolved by the solution . The surface stripped by solution is flatter than that by solution . Compared to solution , solution presents better environmental friendly result and lower cost. Key words: titanium alloy; anodizing; stripping process; oxide films Anodic oxidation is a commonly used surface treatment gen can be absorbed by the samples when they are treated on titanium alloy substrate. Its aim is to improve the corro-