黑龙江工程学院逸夫图书馆土建设计 土木工程毕业设计计算书.docVIP

齐 齐 哈 尔 大 学 毕业设计(论文） 题 目 黑龙江工程学院逸夫图书馆土建设计 学 院 建筑与土木工程学院 专业班级 土木工程 112班 学生姓名 李卓隆 指导教师 张学元 成 绩 2015年6月 20 日 摘 要本设计主要对结构方案中框架进行了结构设计。在确定框架平面布置方式之后，首先进行了层间荷载标准值的计算，接着采用分层法计算得出竖向恒荷载和活荷载作用下的结构内力。然后，利用D值法求出在水平风荷载作用下的结构内力（弯矩、剪力、轴力）。其次，对各种情况下的内力进行了组合，选取最安全的结果进行框架梁、框架柱截面的配筋计算。然后，对基础的结构进行了设计。最后，利用PKPM和CAD软件绘制了框架结构的施工图。关键词框架结构分层法；结构设计Abstract Jixi city academy hotel building design, a total construction area of 8090 m2, building a total length of 60m, width 25.2m, height 22.8m, consists of 6 layers: the layer of 3.6m, no basement. This project is a system of multi story frame structure, fire resistance rating for the two buildings, seismic intensity 6 degrees, concrete frame C30, seismic rating for the three, to maintain the structure made of concrete small hollow block. For the whole structure of cast-in-place reinforced concrete frame structure. Bearing for vertical and horizontal frame bearing. The 6th horizontal frame structure is designed in this design. After determining the frame layouts, the standard values of loads acting on the structure are calculated firstly. Then the internal forces of the structure caused by vertical constant load and live load are calculated by stratified sampling method. Then, the structural internal forces (moment, shear force and axial force).due to horizontal wind load is calculated by using a D value method. Secondly, the internal forces under various circumstances are combined. The security results are selected to calculate the reinforcement of frame beams and frame column. Then, the structure of the shallow foundation is designed. Finally, th6e shop drawing of the frame structure is drawn by PKPM and CAD software. Key words：Frame structure；Layering method；Structure Design摘 要 I Abstract II 第1章 绪 论 1 1.1选题依据和实际应用的价值 1 1.2 在国内外的研究现状 1 1.3 课题研究的内容 1 1.3.1 建筑设计部分 1 1.3.2 结构设计部分 2 第2章 设计任务及要求 3 2.1设计的内容 3 2.1.1 基本概况 3 2.1.