AZ31镁合金型材连续流变挤压成形过程的数值模拟-中国有色金属学报.PDFVIP

20 5 2010 5 Vol.20 No.5 The Chinese Journal of Nonferrous Metals May 2010 1004-0609(2010)05-0923-07 AZ31 1 1 2 1 (1. 110004 2. 110004) AZ31 −− 710~770 − 45˚ AZ31 TG111.4; TG244.1 A Numerical simulation of continuous rheo-extrusion process of AZ31 alloy 1 1 2 1 GUAN Ren-guo , ZHAO Zhan-yong , CHEN Li-qing , WANG Fu-xing (1. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China; 2. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China) Abstract: Through numerical simulation, the temperature and velocity distributions during the continuous rheo-extrusion process of AZ31 alloy were analyzed. The results show that the temperature of the alloy gradually decreases from the casting mouth to the exit in the roll-shoe gap, and the isothermal line deviates from the shoe side to the roll side. The semi-solid region in the roll-shoe gap increases with decreasing casting temperature. In order to prepare a good quality semi-solid slurry, the casting temperature of 710−770 is suggested. The alloy flows in the roll-shoe gap with a laminar pattern and the velocity near the roll is larger than that near the shoe. The temperature difference between the center and