Part 15 - Tow Fatigue SACST 培训教材.pdf

Part 15 - Tow Fatigue Preparation 1) Under “Training Project”, create “Tow” subdirectory 2) Under “Tow” subdirectory, create “Tow Fatigue” directory 3) Copy SACINP.DAT model file from “Tow Inertia” directory to “Tow Fatigue” directory. Modifying Model file to include Response Amplitude Operator values Delete the CENTER line from model. Eight (8) direction RAOs will be input at center of motion X = -35.00 m, Y = 0.25 m and Z = -3.50 m. There RAOs are corresponding to direction 000, 045, 090, 135, 180, 225, 270 and 315. Part of the added RAO lines shall looks like following: RAO HEAD -35.0000 0.2500 -3.5000R000 DP RAO DP40.000 0.798-90.5 0.008-1.60 0.3206.420 0.0130.020 0.367-84.6 0.03398.70 RAO DP39.000 0.796-90.4 0.006-2.40 0.3186.580 0.013-1.07 0.348-85.4 0.03397.80 … RAO DP 6.000 0.025-68.1 -70.0 -56.1 -71.5 0.016-65.9 0.003113.0 RAO DP 5.000 0.007-7.08 -7.90 175.0 -9.95 0.007-6.25 173.0 RAO HEAD 45.000 -35.0000 0.2500 -3.5000R045 DP RAO DP40.000 0.564-90.5 0.574-89.0 0.3206.860 0.24391.70 0.262-84.2 0.020102.0 RAO DP39.000 0.564-90.4 0.572-89.0 0.3187.020 0.23091.30 0.243-85.0 0.020100.0 … RAO DP 6.000 0.018-68.1 0.018-68.0 -50.4 0.013114.0 0.013-65.8 112.0 RAO DP 5.000 0.004-7.08 0.004-7.00 -0.70 174.0 -6.22 173.0 RAO HEAD 90.000 -35.0000 0.2500 -3.5000R090 DP RAO DP40.000 63.10 0.812-89.0 0.3206.580 0.34191.90 129.0 -110. RAO DP39.000 65.50 0.810-89.0 0.3186.730 0.32291.40 137