Immersed boundary method for flow around an arbitrarily moving body英文文献.pdfVIP

Journal of Computational Physics 212 (2006) 662–680 /locate/jcp Immersed boundary method for flow around an arbitrarily moving body Dokyun Kim, Haecheon Choi * School of Mechanical and Aerospace Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwank-ku, Seoul 151-744, Republic of Korea Received 15 November 2004; received in revised form 4 July 2005; accepted 18 July 2005 Available online 1 September 2005 Abstract For the simulation of flow around an arbitrarily moving body, an immersed boundary method is developed in a non- inertial reference frame that is fixed to the body. The Navier–Stokes equation is formulated in a conservative form such that the force terms due to the rotation and the translational and rotational accelerations are included in the nonlinear term. In order to satisfy the no-slip condition on the body surface, momentum forcing and mass source/sink are applied on the body surface or inside the body. The numerical method is based on a finite volume approach on a staggered mesh together with a fractional-step method. The present numerical method is applied to both the forced motion and fluid– structure interaction problems. In the latter, we solve fully coupled Navier–Stokes and dynamic equations for the mov- ing body without introducing any iteration. Four different flow problems are tested and the results are in excellent agreements with previous numerical and experimental ones. 2005 Elsevier Inc. All rights reserved. PACS: 47.11+j Keywords: Immersed boundary method; Arbitrarily moving body; Non-inertial reference fra