dcs1800应用技术.ppt

DCS1800应用技术 双频应用技术 双频段话务量管理 空余 1800 900 容量 开始阶段 迅速增長 成熟阶段 双频网的发展设计与执行 DCS1800 的覆盖 频段的选择 双频网之间的切换 GSM900/1800 双频网话务量管理的改变 双频网设计大纲 GSM1800 GSM900 单 频 网 单频手机用户 DCS 1st Priority GSM 2nd Priority 双 频 网 双频手机用户 Multiband - Classmarks Tolerance (dB) for conditions extreme 2.5 2.5 2.5 2.5 2.5 Power GSM 900 D CS 1800 class Maximum output Maximum output power power normal 1 - - - - - - 1 W (30 dBm) 2 2 8 W (39 dBm) 0.25 W (24 dBm) 2 3 5 W (37 dBm) 2 4 2 W (33 dBm) 2 5 0.8 W (29 dBm) 2 4 W (36 dBm) Classmark 3 contains MS power classes in DCS1800 and GSM900 bands MS sends Classmark 3 within 40ms of Immediate Assignment  Multiband - Classmarks Early_classmark_sending Phase2_classmark_allowed Sys Info Broadcasting 空闲模式的控制 (扇区选择 ) GSM/DCS双频网 话务量管理 通话模式的控制 (切换 ) 两种模式 移动台空闲模式 开始阶段 迅速增长 成熟阶段 GSM900 DCS1800 Cell Selection Re-Selection 小区选择及重选 C2 Parameter, CRO参数 Cell_Bar_Qualify 扇区优先级 频段的选择 双频段话务量管理 Phase2 Switch On Idle 1800 CBQ = 0 C1,C2 CRO, CRH 900 CBQ = 1 C1, C2 CRO, CRH ETSI Recommendation 空闲模式的控制 空闲模式控制 RxLev_Access_Min (C1) Temporary_offset (C2) Penalty Time (C2) Cell_Reselection_Offset(C2) Seperate BA List Cell Bar Qualify(CBQ) GSM1800 小区选择和重选 C1 = (A - Max(B,O)) where A = Received Level Average - RXLEV_ACCESS_MIN B = MS_TXPWR_MAX_CCH - P RXLEV_ACCESS_MIN =Minimum received level at the MS required for access to the system. MS_TXPWR_MAX_CCH = Maximum TXPWR level an MS may use when accessing the system until otherwise commanded. P = Maximum RF output power of the MS. All values are expressed in dBm. 小区选择(C1) 小区重选（C2) -110 -100 -90 -80 -70 -60 -50 CRO 1800 C1 900 C1 RxLev Access Min C1 CRO C2 900 -105 45 0 45 1800A -105 35 20 55 1800B -105 35 30 65 1800C -100 30 30 60 45 900 20 35