多通道智能湿度测试仪设计(正文)..pdfVIP

西华大学课程设计说明书 多通道智能湿度测试仪设计 [1] [2] 摘 要：为了实现对湿度的智能检测 ，采用了一个智能湿度检测 装置的设计方案， 该检测装置通过集成湿度传感器SHT11湿度的变化对应电流的变化，再将电流的变 化转换为电压的变化，该电压信号经SHT11 内部A/D[2]转换器后将模拟信号转化为数 AT89C51 [3] LCD 字信号。最后将数字信号送入 单片机 ，经过软件的控制，在 上显示 输出相应的湿度值，湿度检测范围是15%~100%RH，精度是5%以内。当湿度超过所 RS232 PC 限定的范围可自动报警，通过 可将单片机的数据送至 机做数据的综合处理 VB DS1302 和分析，上位机采用 编程实现了时刻对湿度值的监测记录， 提供实时时 钟。 A/D AT89C51 LCD RS232 关键词：集成湿度传感器，湿度检测， ， ， ， [1] Abstract:In order torealizethe intelligent detection ofhumidity ,usingAdesign scheme of intelligent humidity testing, the testing device through integrated humidity sensor SHT11humidity changes corresponding to the change of current and converts the change of the current to the change of voltage, the voltage signal by the SHT11 after internal of [2] A/D converter converts analog signals into digital signals. Finally, the digital signal is [3] sent to the AT89C51 single chip , which is controlled by the software, and the corresponding humidity value is displayed on the LCD, the humidity detection range is 15% ~ 100% RH, and the accuracy iswithin 5%.When the humidity exceeds the limit the scope of the automatic alarm, through RS232 MCU data can be sent to the PC to do comprehensive treatment and analysis of data, PC using VB programming to achieve the momentthehumidityvalueofmonitoringrecords,providereal-timeclock DS1302. Keywords:Integratedhumidity sensor,humidity d