选dfs用先进环氧材料生产的碳纤维复合电缆芯.docVIP

选用先进环氧材料生产的碳纤维复合电缆芯 供电力传输和配电使用 作者：苏国森，邓小玲 亨斯迈先进材料（广东）有限公司 中国广州市番禺区石楼镇飞鹅岭工业园 邮编：511447 Advanced Epoxy Materials for Carbon Fiber Composites in Power Transmission and Distribution Author: Sam So, Chih Chang, Sally Deng Huntsman Advanced Materials Flying Geese Mountain Industrial Park, Shilou Town, Panyu,Guangzhou 511447, China ABSTRACT: Traditional steel core power transmission cable (ACSR) has its capability limitation in transmitting electricity from power generation plants to end users. The limitation originates from the weight, strength, and high thermal expansion coefficient associated with the steel core used to carry the conductor. Carbon fiber re-inforced epoxy composite core made by pultrusion technique possesses properties of lighter weight, higher strength and, most importantly, the lower thermal expansion coefficient at high temperature, which allows the transmission cable to operate at higher temperature, to sag less so as to carry 28% more ampacity for the same cross section conductor. It is therefore very critical to select the proper resin system for the composite core in order to sustain such high operational temperatures. In general, standard liquid resin based on bisphenol-A (DGEBA) with proper choice of hardener can achieve the glass transition temperature (Tg) of 150°C, but not higher than 200°C. For the latter temperature performance, some special epoxy resins have to be used, such like multifunctional epoxy resin. In this article we will demonstrate a combination of multifunctional epoxy resins, curing agents and catalysts that can match pultrusion process, the composites made from the system can fulfill such stringent temperature requirement. The mechanical properties of these resin systems will also be discussed. KEY WORD: Carbon fiber re-inforced epoxy composite core；pultrusion technique；steel core power transmission cable (ACSR) 摘要：利用传统的钢芯铝铰线（ACSR）从发电厂向最终用户输电时，其容量会受到限制。容量限制取决于用来承载导体的电缆钢芯的重量、强度和热膨胀系数。以拉挤技术生产的碳纤维增强环氧复合材料电缆芯具有重量轻、强度高