ABB+dcs组态课件-2.pptVIP

Human System Interface Introduction Overview The Conductor NT is an operating station for use with the Symphony, INFI 90 OPEN, DCI System Six, and Freelance 2000 Systems. The Bailey systems are distributed process management and control systems. The Conductor NT, process control stations, and field wiring interface terminal boards form the basic building blocks of the distributed control system. The Conductor NT is the human interface to this system, providing the process operator, process engineer, instrument engineer and maintenance personnel with global access to all process and system parameters required by each to perform their respective tasks. Introduction The Conductor NT operates on a personal computer hardware platform under the Windows 2000 environment. Using interactive process graphics the process operator can monitor and control all analog loops and digital devices interfaced to the network via control stations. The Conductor NT provides the engineer with an interface through which to configure and change graphic and hierarchical displays, database I/O, process control functions and sequences, log (report) formats, and security features (including access levels for operating personnel). Most changes are immediate, online and global, requiring no compilation time before downloading and, therefore, no interruption of the process. Introduction The Conductor NT provides maintenance personnel with the capability to globally monitor the operating status of any system component on the network, and to diagnose component failures from any Conductor NT. Introduction Functional Description User Interface The Conductor NT provides the process operator, engineer, and maintenance technician with a window-based interface to both the process and the Conductor NT itself. Conductor NT Management Features The Conductor NT contains many items which aid in managing use of the system. These include: ? User log-ins. ? Security features. ? Messages. ? Message ro