特种绣打版辅助软件embdesign使用简介.docVIP

EmbDesign Owners Manual EmbDesign is an embroidery design editing software developed by Beijing Xingdahao Technology Co., Ltd. Based on Windows platform. It is designed for embroidery industrial automation. It has a plenty of man-machine dialogue interface. The software is no need to be installed. Double click EmbDesign.exe to run the software: Click Menu-〉（English.dll）Contents Ⅰmulti-sequin design Editing 3 One、Open a sequin design file 3 Two、Set sequin needle position 6 Three、View design 7 Four、Modify design 8 4.1Single sequin design transfer to multi-sequin one 8 4.2 Self-defined replacement 12 Five、Save 14 ⅡSimple Chenille Design Editing 15 One、Normal design making software special parameter TTM filling 15 Note：Improve TTM Stitch 17 Two、 Design editing, transfer to simple chenille 20 2.1 Open DST file with special design making software 20 2.2 Right click to select parameter adjustment 21 2.3 Right click design to select chenille adjustment 22 2.4 Edit 22  Ⅰmulti-sequin design Editing To avoid complication in changing normal sequin design to Dahao special multi-sequin design, EmbDesign offers you an easier way. By a single click, you can change to any sequin mode you want. Operations are as following: One、Open a sequin design file C“File (F)”, then “Open (O)”, or click to select design file and enter.  When you first open the design, system will ask you to fill in blanks. You can set according to actual needle count, but for multi-sequin design, we only need to set first and last needle (because sequin device can only be mounted at these two positions). Double click “sequin count” in needle position 1 to modify sequin count. Change the number to 4. Click the blank area on the right to show the following image: We can set sequin size and color to the four sequins. When you finish setting, press OK to confirm and enter the following screen, where you can set multi-sequin design editing. Note: sequin feeding at same time means overlap sequin can be delivered