frp加固结构剥离损伤的声光纤无损检测实验分析word格式论文.docxVIP

AbstractWith the FRP has a wide range application in the structural reinforcement, the brittle failure of the structure due to the debonding in the interface of the FRP reinforced structures attracts people’s attention. We must find a convenient, fast and effective method to test the debonding with no damage, so that we can repair the peeling early, it is important for structural reinforcement.In this paper, we propose to test the vibration of the FRP’s surface based on the sound-optical interferometer and nondestructive testing method. We can determine if there is a damage or not, and we can get the relationship between the amplitude of vibration and the frequency of the sound, and we can also get the relationship between the amplitude and the location of the excitation by using this method. The principle of this method is that we apply sound excitation to a stationary point of the FRP’s surface or point by point, then we detect the vibration of the FRP’s surface by the optical fiber attached to the FRP plate. The amplitude will be a sudden change in the edge of the peeling, and we can find the specific location and size of the peeling from location of mutation.The main object of this paper is to prove the viability of this method used for detecting the interfacial debonding of the FRP reinforced structure through experiments, In the experiments, we apply the sound excitation on three different location according to the optic fiber, the location of the sound is stationary, it is same to the location of optic fiber, and the distance between excitation and optic fiber is constant. Then we can get the relationship between the amplitude of vibration and the frequency of the sound, and we can also get the relationship between the amplitude and the location of the excitation. Moreover, we analyze the effect of testability of the debonding of the FRP reinforced structure with changing the frequency of the excitation, size of the de bonding, and the shape of the debonding.