Introduction 绪论 材料力学培训讲解.pptVIP

Yin Min ( 殷民 ) Mechanics of Materials 《 材 料 力 学 》 School of Aerospace Mechanics Teaching and Experiment Center (力学中心) Feb. 2011 Contents of “Materials Mechanics” 1. Introduction Part One: Basic Deformations 2. Axial Tension and Compression 3. Torsion A Geometric Properties of an Area 4. Internal Force of Bending 5. Bending Stress 6. Bending Deformation Part Two: Combined Deformations 7. Stress State Analysis 8. Strength Theories 9. Combined Deformations Part Three: Special Topics 10. Energy Methods 11. Statically Indeterminate problems 12. Dynamic Loading 13. Fatigue Strength 14. Stability of Compressed Columns 15. Strength of Connections 24 Hours (Lecture) 2 Hours (Exercise) 4 Hours (Experiment) SUM: 64 Hours 12 Hours (Lecture) 2 Hours (Exercise) 4 Hours (Experiment) 14 Hours (Lecture) 2 Hours (Exercise) Main Features of This Course: 1. 概念新，公式多，理论联系实际 2. 重视课堂、作业、实验三个环节 4. 多媒体教学，信息量大、节奏快 3. 注意每章的基本要求和解题思路 Term Grade：Term exam (80%) Homework (10%) Reading (5%) Experiments (5%) 5. 中英教材、课件，培养阅读能力 《材料力学》，蔡怀崇、闵行编著，西安交通大学出版社，2004年 《Mechanics of Materials》，R.C. Hibbeler著，武建华缩编，重庆大学出版社，2007年，ISBN978-7-5624-4141-0 每一个寝室借一本外文教材。请大家妥善保管，避免破损和涂抹，学期结束前请学委收齐还于老师； 以中文教材为主，外文教材为辅； 每章中的chapter objectives, important points, procedure for analysis, example比较重要； 不要把本门课程当成英文课来学习； 外文书中的英制单位：lb磅，kip千磅，ft英尺，in英寸，psi磅/平方英寸， ksi千磅/平方英寸。 About the Textbook Study Methods ---- Combined Theories with Practices 观察试验，分析归纳，总结规律； 抽象简化，演绎推理，建立理论； 用于实践，验证完善，不断发展。 Chapter 1. Introduction 1.1 Task of Materials Mechanics Machine or Structure: Some members or components (构件) Member: Bar(杆), Plate(板), Shell(壳), Solid(体) Members should have enough ability of bearing loading (足够的承载能力) Materials Mechanics: study the ability of bearing loading of bars Chapter 1. Introduction 1.1 Task of Materials Mechanics Three aspects of bearing