基于状态空间模型的facts控制策略分析-analysis of facts control strategy based on state space model.docxVIP

(2) 在传统的无功电流检测算法的基础上，提出了两种新型的控制目标电流检测算法。第一种方法直接对装置输出的电流进行控制，通过直流 侧电压和变流器两侧功率传输的关系，推导出损耗电流与直流侧电压的变 化关系公式；提出损耗有功电流和负荷无功电流的计算方法，及直流侧电 压的控制策略。第二种检测方法在第一种方法的基础上进行改进，基于三 角函数自身的数值关系，实现非常简单。同时，将其推广到三相三线制系 统，通过补偿负序分量，抑制其三相不平衡；可提取其谐波成分，对特定 次谐波进行补偿。(3) 针对基于直流侧电容电压控制和系统无功电流反馈控制的控制算 法进行了讨论。对 PI 控制以及滞环控制分别进行了建模和仿真分析，并且 对滞环控制的环宽对变流器的影响进行了讨论。此外，针对参数不确定系 统的鲁棒性能分析和综合问题，引入了 H ??控制策略，不再依赖 Riccati 方程。 这是一种基于线性矩阵不等式的处理方法。它将控制问题转化成一个线性 矩阵不等式系统的可行性问题，或者是一个具有线性矩阵不等式的凸优化 问题。这种方法可以克服 Riccati 方程的方法中很多不足。仿真证明了这一 方法的正确性。关键词：状态空间模型，FACTS，动态无功调节，变流器，动态仿真Research on FACTS Control Strategy Based on State-Space ModelABSTRACTWith the rapid development of power electronic devices, Flexible AC Transmission Systems (FACTS) are commonly used. It is AC transmission equipment based on power electronic technology and other static control devices, which can enhance the control capability of transmission system and increase power transmission capacity.In this paper, the control strategy of FACTS has been studied, which refers to the theory, mathematical modeling, parametric design, control target current detection algorithm, control algorithm and simulation by MATLAB / SIMULINK and the EMTP. The main work has been done as follows:Built mathematical modeling for single-phase and three-phase converters based on state-space averaging method, and fixed various circuit parameters for the DC capacitor, output reactors, snubber circuit, pre-charge circuit, pre-charge circuit, filter circuit, etc.Proposed two new current-detection algorithm of the control target current based on the traditional reactive current detection algorithm. The first method is to control the output directly to avoid cumbersome process monitoring of activeand reactive current components and simplify the process of monitoring harmonics. Deduced the relationship between loss active current and voltage of DC side based on the principle of power flow between the two sides of the convertor; proposed the DC side voltage control strategy and a metho