开机调试工作内容.docVIP

Section One: Running Procedure开机程序 开机调试工作 CONTENT OF RUNNING 检查调整 Inspecting and adjusting 机组外检查(中打“(”；若不符合要求，请在“否”前的(中打“(”，并在虚线上说明） Inspecting the periphery of the unit (If the following items meet the requirements, please draw“(”in ( at the front of “Yes”; if not, please draw “(”in ( at the front of “No”, and illustrating the reason at the broken line) 安装水平 ( 是(Yes) ( 否(No) If the installation level meets the specifications or not: 水流开关安装位置 ( 是 (Yes) ( 否(No) If the installation location of the flow switch meets the specifications or not 冷冻水系统清洗是否符合规范： ( 是 (Yes) ( 否(No) If the flushing of the chilled water system meets the specifications or not 冷冻水系统放气是否符合规范： ( 是 (Yes ) ( 否(No) If the air-exhausting of the chilled water system meets the specifications or not 冷冻水泵检查是否符合规范： ( 是(Yes ) ( 否(No) If the inspection of the chilled water pump meets the specifications or not 冷却水系统清洗是否符合规范： ( 是(Yes ) ( 否(No) If the flushing of the cooling water system meets the specifications or not 冷却水系统放气是否符合规范： ( 是(Yes ) ( 否(No) If the air-exhausting of the cooling water system meets the specifications or not 是否具备冷负荷： ( 是(Yes ) ( 否(No) If possessing the refrigeration duty or not 是否准备好控制电源： ( 是(Yes ) ( 否(No) If making good ready of the controlling power 控制电压： 伏特(Volt) Controlling voltage 是否准备好各项电源： ( 是(Yes ) ( 否(No) If making good ready of all items of power supply 是否安装好水流开关： ( 是(Yes ) ( 否(No) If well-installing the flow