影响聚合物产品不溶物指标因素分析及控制措施.docVIP

影响聚合物产品不溶物指标因素分析及控制措施 　　摘要：聚合物生产工艺中聚合反应的好坏直接影响到产品的粘度，如果粘度偏低，则达不到分子量指标；若粘度偏高，则易使水解后的产物不溶物指标偏高甚至超标。影响聚合反应的因素有流量计准确性; 吹氮过程中氮气含氧量;催化剂加入量; 熟化时间;反应胶体造粒的大小和PH值等影响因素。控制措施包括减少杂质含量，控制PH值范围，优化聚合操作等。 　　Abstract: The quality of polymerization in polymer production process directly affects the viscosity of the product. If the viscosity is low, you can not reach the molecular targets; if the viscosity is high, the insoluble indicators of the hydrolysis product may be higher even exceeded. The factors affecting the accuracy of polymerization include the accuracy of flowmeter, the Oxygen content of nitrogen