Concept Specificatio Inner Range概念的规范范围内.doc

INNER RANGE SYSTEM SPECIFICATION February 2011  Disclaimer The manufacturer and/or its agents take no responsibility for any damage, financial loss or injury caused to any equipment, property or person resulting from the correct or incorrect use of this document. Whilst every effort has been made to ensure the accuracy of this manual, Inner Range Pty Ltd assumes no responsibility or liability for any errors or omissions. Due to ongoing changes and development, the content of this document is subject to changes without notice. Please direct enquiries and comments regarding this document to: Inner Range Pty. Ltd. 1 Millennium Court Knoxfield 3180 Victoria, Australia +61 3 9780 4300 admin@ SUBJECT TO CHANGE WITHOUT NOTICE. CHECK WEBSITE FOR LATEST REVISION. Index Section 1 - Software Spec 5 1. Computer Requirements 5 2. Architecture 7 3. Security 9 4. Client Management 10 5. Interface With Field Hardware 11 6. Programming 16 7. Virtual Panel 19 8. Software Database 20 9. Photo ID (optional module) 23 10. Card Pool (optional module) 25 11. Schematics 26 12. DVR Integration (optional module) 28 13. Review 30 14. Alarm Management 31 15. Communicator (optional module) 33 16. Dynamic User Import (optional module) 35 17. COM Interface (optional Module) 36 18. Basic Reports 37 19. Advanced Reports (optional module) 38 20. Multi-Tenant 42 21. Operators 43 22. Tag Board (optional module) 44 23. User Qualifications (optional module) 45 24. Credit Tracking (optional module) 46 25. Active User Rotation Module - AURM (optional module) 47 Section 2 - Hardware Spec 48 26. General Requirements 48 27. System LAN (Security Communications Network) 50 28. Control Module 52 29. User Terminals 56 30. 2x16 character LCD Terminal 56 31. Weatherproof Terminals 58 32. Touchscreen Terminals 60 33. Input / Output Expansion 61 34. 8 Input Zone Expansion Modules 62 35. 16 or 32 Input Zone Expansion Modules 63 36. Wireless Detection 65 37. Door Controllers 67 38. Intelligent Door Controllers