固态存储器高速远距离数据传输系统设计-design of high-speed long-distance data transmission system in solid-state memory.docxVIP

中北大学学位论文中北大学学位论文万方数据万方数据The Design Of High-speed Long-distance Data Transmission System For Soild-state Storage DeviceAbstractThe soild-state storage device developed by North University of China is mainly used for capturing and storing of slow variation parameter,rapid variation parameter and digital value in the flying process of projectile.The ground test device and the soild-state storage device constitute a closed-loop test loop,which can read ,display,process,analysis and storage the data from the storage device.In the test site,a lot of testing equipment will be placed in the place,and the data transmission and test must be completed before the projectile take-off under the condition of the projectile loaded with fuel.Therefore,in order to ensure the reliability of test and the safety,researchers need to stay away from the projectile,and acquire accurate signals and data from solid-state storage device,through remote acquisition,coding and records.Therefore,this paper designs a high-speed and remote transmission system,which combines LVDS interface technology,optical fiber communication technology and RS error correction coding technology.First of all,by comparing the common data interface,this paper chose LVDS interface technology of superior performance.Then,the main structure and working principle of an LVDS device were analyzed.Finally,using the LVDS device with point-point topology and the embedded clock bits SerDes framework,the system circuit was designed.The principle and advantages of the optical fiber communication and error correction coding were introduced,and the implementation principle of encoding and decoding was emphatically analyzed.Secondly,the hardware and software of the system were designed.In hardware parts,aiming at long-line differential signal transmission,the the drive and equalizer were used for signal driver and the adaptive equalization,the electrical isolation was realized through the photoelectric coupling isolation circuit,an