高性能钢筋混凝土梁柱节点抗震性能试验分析-experimental analysis of seismic performance of high performance reinforced concrete beam-column joints.docx

华中科技大学博士学位论文华中科技大学博士学位论文II万方数据II万方数据于保守，可能导致节点箍筋配置过剩，造成不必要的资源浪费和施工上的困难。扰动应力场模型是在修正的斜压场理论上进行改进而得到的一种模型，可以考 虑裂缝间的剪切滑移效应，主要用于钢筋混凝土构件中应力紊乱区的受剪分析。采 用基于扰动应力场模型的自编程序对钢筋混凝土剪切板进行受剪分析，得到其抗剪 强度，并与试验结果进行对比。结果表明：其抗剪强度计算值与试验值之平均比值 为 1.16，方差为 0.11，吻合良好。从而验证了自编程序的准确性与可靠性。采用基 于扰动应力场模型的自编程序对钢筋混凝土梁柱节点进行受剪分析，得到其剪切应 力应变关系与抗剪强度，并与试验结果进行对比。结果表明：梁柱节点剪切应力应 变关系计算结果与试验结果吻合良好，梁柱节点抗剪强度计算值与试验值之平均比 值为 0.87，方差为 0.23，吻合较好。基于扰动应力场模型的自编程序可用于梁柱节 点受剪行为分析。采用 OpenSees 建立了高性能钢筋混凝土梁柱节点与普通钢筋混凝土梁柱节点有 限元模型，模型中 beamColumnJoint 单元的剪切块分量可由基于扰动应力场模型的自 编程序定参。通过计算将模拟结果与试验结果进行对比，梁端力–位移滞回曲线吻 合良好，从而验证了所采用数值分析方法的合理性、准确性和通用性。接着对高性 能钢筋混凝土梁柱节点进行了参数分析，分别研究梁配筋率、节点配箍率和轴压比 对高性能钢筋混凝土梁柱节点抗震性能的影响。关键词：高性能钢筋梁柱节点抗震性能拟静力试验扰动应力场模型节点配箍率梁配筋率III万方数据III万方数据AbstractWith the rapid development of civil engineering in China, civil engineering structures are heading towards large-scale and diversification. The situation that general strength steel is as the main material of reinforced concrete structures have been unable to meet the above requirements to achieve energy saving and emission reduction, green environmental protection and sustainable development of civil engineering. It has become an urgent task that developing low-cost high-performance reinforcement and study on its engineering applications. Beam-column joints which are widespread in buildings, bridges and other civil engineering structures are important components to ensure the structures work in integrality. The beam-column joints endure horizontal shear, vertical shear and bending moment under seismic action. The mechanical behavior of beam-column joints are quite complex. It is difficult to repair once the beam-column joints suffer damage. Study on the seismic performance of concrete beam-column joints reinforced with HRB500E high-performance steel bars in China is still in blank stage. therefore, it is necessary to conduct in-depth study on the seismic performance of high-performance reinforced concrete beam-column joints.In this paper, the pseudo-static test was conducted o