本科论文设计-3D光立方设计与实现.docVIP

PAGE \* MERGEFORMAT IV3D光立方设计与实现摘 要对于许多电子爱好者来说，光立方并不陌生。它的功能也在许多人的开发下越来越强大。每一个见过光立方效果的人都会被其超酷的3D显示效果所震撼。我就是其中之一。于是萌生了自己动手做一个光立方的想法。在搜索了大量相关资料后，我发现，市场上流通着的光立方中，有一种整机只有一个芯片的光立方，但是价格不菲。其他各种版本的光立方的制作方法又都很复杂繁琐。到目前为，尚未出现过一套制作简单、价格低廉而又功能强大的光立方的完整设计方案。本设计讲述了一款基于STC12C5A60S2单片机控制的光立方的制作，并阐述了整体设计思路。本设计不仅可以像发光二极管点阵一样显示平面的静态或动态画面，还可以显示立体的静态或动态画面，打破了传统的平面显示方案。同时又增加了显示的花样和立体图案显示效果，可以广泛用于传媒信息显示和各种装饰显示，光立方显示比发光二极管点阵更具有视觉效果，而且画面图案更加非富多彩。本设计详细介绍了系统的软硬件设计、硬件的整体布局、LED灯的搭建的主要方法；硬件主要分为三个模块：主控模块、驱动模块、显示模块。系统采用的是8*8*8模式构成512个LED灯后组成的光立方，驱动电路是采用我们常用74HC573、uln2803数字芯片。采用C语言编程Keil4编译软件。最终通过LED灯的亮灭展示出美轮美奂的图案。关键词：LED光立方，单片机，74HC573，ULN2803 大连东软信息学院毕业设计（论文） Abstract Design and Implementation of 3D Light CubeAbstractFor many electronics enthusiasts, Light Cube is no stranger. It also functions in many people develop more powerful. Each light cube effect seen who will be its cool 3D display effect of the shock. I was one of them. So initiation DIY a light cube idea. After searching a lot of relevant information, I found that the market liquidity of the light cube , there is a whole only one chip light cube , but expensive. Various other versions of the method of making light cube again very complex and cumbersome. Up to now, there have not yet produced a simple, inexpensive and powerful priced complete design light cube.This design tells the story of a microcontroller -based control STC12C5A60S2 light cube production, and described the overall design concept. This design not only as light-emitting diode dot matrix display static or dynamic picture plane, as can also display three-dimensional static or dynamic images, breaking the traditional flat panel display solutions. While increasing the pattern display and display three-dimensional pattern , can be widely used in a variety of media information display and decorative displays , light cube display more visual effects than the light-emitting diode matrix , but the picture is more rich and colorful