- 9
- 0
- 约2.35万字
- 约 46页
- 2018-07-14 发布于浙江
- 举报
PAGE \* MERGEFORMAT IVx86保护模式下简易操作系统的设计与实现摘 要简易的操作系统从只有二十多行的引导扇区代码运行并出发,按部就班地展现出一个微型操作系统框架的完成过程。不但关注系统代码的本身,也同时注重完成这些系统代码的过程以及思路。有别于其他的理论型,本次项目展示的是一幅实践下的路线图。在路线图的指引下,可以按部就班的完成各个模块功能,可以消除在独自面对整个操作系统数万行代码时的挫败感和迷茫。需注意的细节问题在一步步的开发中得到了分析,了解和认识系统的核心原理就依赖于这些实践中的分析,最终使整个开发过程少走一些弯路。这其中每一个步骤都是以前一步骤的工作成果作为基础,从而展现一项新的功能。而在功能内部,一项比较大的功能被分解成许多小的工程,通过完成每个小的工程,从而可以不断获得阶段性的项目成功,最终让整个开发过程变得有趣并且轻松。系统完成后在Bochs这一开源虚拟机下得到成功运行,实现了一个系统应有的基本功能,把书籍中的理论实践化,所谓麻雀虽小五脏俱全,不可否认的是系统中应该还存在着潜在的Bug,因为只要是程序就一定会有漏洞,这就得在后期的测试中找出并加以修复。关键词:操作系统,开发,代码,扇区大连东软信息学院毕业设计(论文) Abstract Design and implementation of a simple operating system in x86 protected modeAbstractEasy operating systems and multi-line starting from only twenty boot sector code , showing step by step through the process of a miniature operating system framework. Not only concerned about the system code itself , and also pay attention to the completion of these processes and system code idea . Unlike other theoretical model , this project demonstrates that a practice under the roadmap . Under the guidance of the roadmap , step by step to complete each module can function, you can eliminate the entire operating system in the face alone tens of thousands of lines of code when frustration and confusion . Should pay attention to the details of the problem is a step in the development of the analysis , understanding and knowledge of the core principles of the system will depend on the analysis of these practices , and ultimately the entire development process, take some detours . Each step which previous work product of the previous step as the base , which show a new feature . The functional interior , a large function is broken down into many small projects , through the completion of each small project , so you can continue to receive periodic project success , and ultimately the entire development process becomes fun and easy .Upon completion of the system obtained under the open-source Bochs vir
您可能关注的文档
- 本科论文设计-便携式酒精浓度检测仪设计与实现.doc
- 本科论文设计-3D光立方设计与实现.doc
- 本科论文设计-多路数字电压表设计与仿真.doc
- 本科论文设计-多功能盲人电子表设计与实现.doc
- 本科论文设计-高压垂直双扩散MOS器件的设计与实现.doc
- 本科论文设计-歌曲比赛抢答系统设计与实现.doc
- 本科论文设计-高性能霍尔开关电路设计与验证.doc
- 本科论文设计-公交语音报站系统的设计与实现.doc
- 本科论文设计-红外遥控电风扇的设计与实现.doc
- 本科论文设计-基于0.35微米工艺的电压控制振荡器电路设计与实现.docx
- 中国国家标准 GB/Z 37551.300-2026海洋能 波浪能、潮流能及其他水流能转换装置 第300部分:河流能转换装置发电性能评估.pdf
- GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法.pdf
- 中国国家标准 GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法.pdf
- 《GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法》.pdf
- 中国国家标准 GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义.pdf
- GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义.pdf
- 《GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义》.pdf
- 中国国家标准 GB/T 4937.37-2025半导体器件 机械和气候试验方法 第37部分:采用加速度计的板级跌落试验方法.pdf
- 《GB/T 4937.10-2025半导体器件 机械和气候试验方法 第10部分:机械冲击 器件和组件》.pdf
- 中国国家标准 GB/T 44937.2-2025集成电路 电磁发射测量 第2部分:辐射发射测量TEM小室和宽带TEM小室法.pdf
原创力文档

文档评论(0)