TRT叶片阻尼结构设计及减振性能研究-机械制造及其自动化专业论文.docxVIP

西安理 西安理工大学硕士学位论文 II II Abstract Title: ι STUDY ON STRUCTURAL DESIGN AND VIBRATION REDUCTION PROPERTIES OF TRT BLADE DAMPER Major: Mechanical Manufacture and Automation Graduate: Zhanlong Qin Supervisor: Associate prof .Dexin LI Signature: A川付。比 Signature: 谷 .μυ Abstract Blast Fumace Top pressure Recovery Turbine Unit (TRT) is a mechanical device that can generate electricity by utilizing the pressure and heat energy of the top gas. The blades are one of the key components of a TRT device ，at work the joint action of centrifugal force，steady and unsteady flow force，often there will be fatigue damage caused by vibration . In this pape:r:， according to the structural characteristics and working environment of a domestic production of TRT blade，TRT damping structure blade is designed and the mechanical properties of the blade are analyzed. According to the structure，assembly characteristics of TRT blades，as well as the working environment ，etc. the damping structure of the .TRT blade are designed by using dry friction damping mechanism and a big damping characteristic of damping materials，the s甘ucture is simplt\ technology is good. Damping settings on the circumferential surface of the blade root，it has no effect on the flow field of TRT. The metal rubber material used for damper structure，it has a large damping，high strength，high tempera阳re and corrosive gases in the environment ， which can still maintain excellent damping properties . Geometric models and finite models of the original leaves and damp leaves were established. The 也让te element analysis software (Ansys) were used for static and dynamic mechanical analysis.The stress，strain distribution，contact state，也e characteristics ，changes of contact stress and the natural frequency of each blade was obtained.Static mechanics 缸ld modal analysis were caηyied on two different wedge-shaped damping structure TRT blades and compared with the results of the original blade.Comparative analysis shows that:in the three