薄壁钢管混凝土长柱承载性能分析-结构工程专业论文.docxVIP

华侨大学硕士学位论文 华侨大学硕士学位论文 IV IV unstiffened concrete-filled thin-walled steel tubes were summed up by analysis of test data. Parametric analysis selected lenderness ratio was performed on long columns of stiffened and unstiffened concrete-filled rectangular thin-walled steel tubes subjected to axial compression by the finite element method. layouting the longitudinal stiffeners can effectively prevent local buckling occurred in advance from the load-displacement curve,which improved the bearing capacity and ductility of the columns.respectively, the formulas for ultimate bearing capacity of long stiffened and unstiffened concrete-filled thin-walled steel tube columns were returned, those could be used to estimate the ultimate bearing capacity of long columns ,which made a preliminary exploration for its application to practical engineering. load-displacement curves and failure mode of long stiffened concrete-filled rectangular thin-walled steel tube columns subjected to eccentric compression have been studied, the mechanical performance which was affected by slenderness ratio and eccentricity was analyzed. The formulas for ultimate bearing capacity of short and long columns of stiffened and unstiffened concrete-filled thin-walled steel tubes subjected to eccentric compression were inferred in cross-section for algorithm,and were verified, the results showed that the formula could accurately predict the ultimate bearing capacity of columns ,which could provide a reference for the engineering practice. Key words: long concrete-filled thin-walled steel tube columns; bearing capacity; initial geometric imperfections; width-thickness ratio; end-plate stiffness; finite element method 原创性声明 本人声明兹呈交的学位论文是本人在导师指导下完成的研究成果。 论文写作中不包含其他人已经发表或撰写过的研究内容，如参考他人或 集体的科研成果，均在论文中以明确的方式说明。本人依法享有和承担 由此论文所产生的权利和责任。 学位论文作者签名： 日期： 学位论文版权使用授权声明 本人同意授权华侨大学有权保留并向国家机关或机构送交学位论 文和磁盘，允许学位论文被查阅和借阅。 论文作者签名： 指导教师签名： 签 名 日 期： 签 名 日 期： PAGE PAGE 10 第一章 绪 论 1.1 课题背景 钢管混凝土(Concrete-Filled Steel Tub