动态稳定器抑制次同步谐振的控制策略研究-电力系统及其自动化专业论文.docx

STUDY ON THE CONTROL STRATEGY OF DYNAMIC STABILIZER FOR SUBSYNCHRONOUS RESONANCE MITIGATION ABSTRACT As the long-distance and large-capacity transmission is more popular in modern power system, series compensated equipment is often used to keep system stability and utilize finite resource more economically and efficiently. However, torsional interaction between the series compensated transmission network and the turbine-generator shaft system may lead to subsynchronous resonance (SSR) problems, which should be well understood and taken into account when series compensation is designed. SSR conditions may limit the degree of compensation needed for better performance of the power system. The use of dynamic stabilizer may alleviate such restriction. Presently, dynamic stabilizer is in its stage of research and development in demostic Jinjie plant project. The improved dynamic phasor model, control strategy and the optimum design methods are focused in the thesis. The main work is as follows: The improved dynamic phasor model of dynamic stabilizer is proposed with dynamic phasor method. The improved model is more accurate for subsynchronous resonance study because the dead-zone characteristic of thyristors is considered. The independent modal control strategy of dynamic stabilizer is designed. It can mitigate multi-mode SSR simultaneously and has strong  anti-disturbance ability to the velocity measurement noise. Moreover, its phase compensation and gain can be calculated individually. The optimal design method of dynamic stabilizer based on PSCAD/EMTDC simulation method is proposed. Dynamic stabilizer of the electromagnetic transient simulation model in the power electronic circuit is adopted to avoid the difficulties in modeling dynamic stabilizer. In addition, a practical optimal design method of independent modal control strategies is developed utilizing the multi-run component in PSCAD/EMTDC. During the simulation and optimization, just the computer is i