盾构隧道管片结构理论分析及工程应用研究岩土工程专业论文.docxVIP

南昌航空大学硕士学位论文Ab 南昌航空大学硕士学位论文 Abstract II II Abstract The fast growing world economy has greatly promoted the development of urbanization after entering the twenty-first century,with the rapid development and the saturation of the cities’ surface space utilization, the mankind is gradually paying more and more attention to the vast underground space. Not only in China but also all over the world, Shield tunnel has become one of the most important building method in the large number of subway constructions. Benefit from the shield tunnel’s own advantages and the promotion of the large-scale constructions in urban infrastructure and underground space, Not only the shield tunnel construction technology but also its theory has made a great progress. However,due to the complexity of the underground structures and geotechnical engineering characteristics, the calculation model of shield tunnel is far from perfect. So the constantly theoretical research of shield tunnel calculation model which can best reflect the actual engineering situation is in need. In this paper, theoretical calculation of shield tunnel structure has been studied, the major points of this thesis are as follows: Firstly, this paper has reviewed the history of the shield tunnel ,then, a summary about the worldwide shield tunnel calculation model and related theory has been presented,besides, in this paper, some common models, such as the routine method (free deformation method), modified routine method, the elastic multi-hinge model, the two-ring of beam-spring model and beam- joint model are described in detail. Secondly, The different load calculation methods and their application conditions of the shield tunnel are summarized in this paper,the load calculation methods of the shield tunnel are discussed. The simplified calculation of the soil pressure, the feedback analysis method and the method that considers the interaction between lining and formation are introduced, besides,the simplified calculati