《端盖塑料模具毕业设计》-毕业学术论文设计.docVIP

前言 洛阳理工学院毕业设计（论文） PAGE I PAGE 12 端盖注塑模具设计 摘 要 本次毕业设计的课题为端盖注塑模具设计，主要在对塑件进行成型分析的基础上从原材料分析、成型特性、分型面的选择、浇注系统的设计、冷却系统的设计、型芯和型腔的结构设计、推出复位结构设计、侧向抽芯机构的设计和导向机构的设计等多方面详细阐述了端盖注塑模具的设计过程。同时通过合理地选择注射机并对注塑压力、最大注塑量、锁模力、开模行程等相关方面进行校核，进一步保证设计的合理型，并设计温度调节系统和阐述模具装配等方面。本课题最大的特点是模具由左右侧滑块组成，设计的模具结构合理，加工方便，工艺性好，能较好地运用于实际生产。 同时，在设计过程中，通过查阅大量资料、手册、标准、期刊等，结合教材上的知识也对注塑模具的组成结构（成型零部件、浇注系统、导向部分、推出机构、排气系统、模温调节系统）有了系统的认识，拓宽了视野，丰富了知识，为将来独立完成模具设计积累了一定的经验。 关键词：端盖注塑模具，侧向抽芯，分型面，注塑模具，注射机 Cover Injection Mold Abstract The graduation design topic of cover for injection mold design, mainly in the plastic parts for forming based on the analysis of the raw material analysis, from molding character, classification, the selection of the design of gating system, cooling system design, cores and mold structure design, structure design, launched reset lateral core-pulling mechanism design and the design of steering mechanism and so on various explains in detail the design process of the cover injection mold. At the same time through the reasonable selection of injection machine and the injection pressure, maximum injection quantity, clamping force, open mold stroke as well as related aspects of checking, further assure rational design of the type, and design temperature control system and expounds the mold assembly, etc. This subject is the biggest characteristic is to mould a left lateral spreads piece of composition, the design of die structure is reasonable, processing is convenient, good in usability and can be well applied to practical production. Meanwhile, in the design process, access to a large number of data, manuals, standard, periodicals, combined with the knowledge on teaching material of injection molds composition structure (molding parts, injection system, guiding parts, launch institutions, exhaust systems, mold temperature adjusting system) have the understanding of the system, widen the vision, rich knowledge, for future independent completed mold design accumulate