A Parameterization Approach for英文版本.pdfVIP

5708 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 60, NO. 12, DECEMBER 2013 A Parameterization Approach for Enhancing PV Model Accuracy Yousef A. Mahmoud, Weidong Xiao, Member, IEEE , and Hatem H. Zeineldin, Member, IEEE Abstract—Reliable and accurate photovoltaic (PV) models are essential for simulation of PV power systems. A solar cell is typi- cally represented by a single diode equivalent circuit. The circuit parameters need to be estimated accurately to get an accurate model. However, one circuit parameter was assumed because of the limited information provided by commercial manufacturing Fig. 1. Equivalent circuit of double-diode and single-diode model. datasheets, and thus the model accuracy is affected. This paper proposes a parameterization approach for PV models to improve There are various methods presented in literature, for extract- modeling accuracy and reduce implementation complexity. It de- ing parameters of single diode PV models. One approach would velops a method to accurately estimate circuit parameters, and thus improving the overall accuracy, relying only on the points be to use the device physics to develop expressions for the I–V provided by all commercial modules datasheet. The proposed curve parameters, but such parameters would be in terms of modeling approach results in two simplified models demonstrat- semiconductor material constants and manufacturing variables ing the advantage of fast simulation. The effectiveness of the such as doping densities [5], [13], [24]. Most semiconductor modeling approach is thoroughly evaluated by comparing the constants vary considerably with producti