关于虚拟仪器技术的齿轮箱故障检测系统分析.pdfVIP

Abstract Gear box has the advantages of the fixed transmission ratio, large drive torque and compact structure, etc., and has become one of the key driving parts of the mechanical equipment. For example, its operability, transmission property and safety has a direct influence on the overall performance of a car, Therefore，Carrying out the research on the state detection and fault diagnosis of gearbox , is an important way to improve the equipment operation reliability and prevent accidents, which has important practical significance on ensuring safety in production and economic development. Vibration signal is the carrier of gearbox fault features, fault detection method based on vibration analysis has been widely used. This paper took focus on the vibration signal and finally developed the gearbox fault detection system, the main work is as follows: The gearbox typical fault vibration signal of time-frequency domain features is investigated from the research of gear box multiple fault type and its mechanism Based on this, combining with the virtual instrument technology, the test platform for the gearbox fault detection system was built with the PCI1712 data acquisition module. Combing with gear box fault characteristics, power spectrum and cepstrum, envelope demodulation, wavelet analysis signal processing methods has been applied to the analysis of vibration signals; the perporties of corresponding signal analysis program and the real-time data acquisition, signal storage, fault diagnosis has been developed Using LabVIEW virtual software .as well as ,For the convenience of gear box fault diagnosis data management, a database management module