环境试验设备：无线温度湿度测量系统的研究与设计-仪器仪表工程专业论文.docxVIP

I 摘 要 摘 要 环境试验设备和高温高压灭菌装置是保证产品质量以及人民健康免受病菌侵害不 可或缺的试验设备。因此对该类试验设备及其温度、湿度测量的准确性检验验证，就愈 显重要。准确的获得温度湿度信息具有很重要的意义。 我国 GMP(国际上对《药品生产质量管理规范》的通称)、世界卫生组织 GMP 以及欧 盟现行标准 EN554 明确规定，必须对干热及湿热灭菌设备进行灭菌温度和时间的验证。 为此国际标准委员会专门设立了“国际消毒委员会”和“国际医疗标准委员会”。近年 来，我国政府也将制药设备管理、医疗器械的质量控制以及医疗卫生计量检测工作列为 重点发展的工作。 针对此现状，现普遍应用的一些传统的计量检测标准仪器将无法满足验证要求，该 类设备更多的是依赖操作人员的经验，无法准确给出最具说服力的数据。而采用现代电 子技术实现传感数据的无线传输存储、采集智能化??通过曲线、数字、报表真实记录物 理参数（温度、湿度等）的达到时间和持续时间的“温度、湿度无线检测装置”，真正 做到了直观检测验证和检测结果的准确性、可靠性。 本设计的控制核心是 MSP430 单片机，利用温度湿度传感器把多个温度湿度测量节点 使用单总线和单片机相连形成分布式的系统。控制器通过温度湿度传感器实时检测各节 点的温度湿度变化，经 nRF24L01 数传模块进行接受和发送。通过串口将检测到的温度 信息回馈到 PC 机，这样就实现了对整个系统的远程检测。 关键词 无线测量 温度 湿度 MSP430 nRF24L01 II Abstract Abstract Environmental testing equipment and autoclaving device is used to ensure product quality and protect peoples health from the bacteria. It is an indispensable test equipment. It is pretty important to verify the accuracy of this type of test equipment and temperature, humidity measurements. Getting the precise temperature and humidity information has a necessary significance. Our GMP (internationally known as the Good Manufacturing Practice) and the World Health Organization and the current EU GMP standards EN554 clearly defined that the sterilization temperature and time on the dry heat and moist heat sterilization equipment must be validated . The International Standards Committee established the International Medical Standards Committee and the International Committee of disinfection. In recent years, the Chinese government also put an emphasis on the development of pharmaceutical equipment management, quality control, and medical measurement of health testing of medical equipment . According to this situation, some traditional standard measuring and testing equipment now widely used will not meet the validation requirement. This kind of equipment is heavily dependent on the operators experience and can not accurately give the most convincing data . Using the modern electronic technology to achieve wireles