基于plc的椭圆软波导生产线自动控制系统的研制-机械电子工程专业论文.docxVIP

万方数据 Subject： Development of Automatic Control System for Flexible Elliptical Waveguide Production Line Based on PLC Specialty：Mechanical Electronic Engineering Name： （Signature） Instructor： （Signature） Abstract According to the present situation of the Flexible Elliptical Waveguide production lines which have many problems including the long errors adjustment cycle is long, the implementation of data can not effectively monitoring and the production operation requires an experienced worker, and combined with the existing production equipment and production process, we made a system based on a series of PLC as control core, including real-time monitoring, intelligent control, remote operation, automatic control system, data recording and processing functions of the computer. Through the use of rotary encoder for real-time monitoring of each production link multiple velocity parameter, and the design of closed loop control system, and the calculation results are sent to the frequency converter to control the operation of the motor, to ensure that all production coordination, greatly shorten the feedback regulation time, enhancing the stability of the technical parameters of product. At the same time, the system for real-time monitoring of the production process, including welding water pressure, welding air pressure, gel temperature, cooling water temperature, the actual working voltage and working current, and is provided with a strain corresponding mechanisms, to ensure that the intelligence of the whole production process so that Human errors will not lead to the failure of the product quality or even produce safety danger. System through the AD module of PLC, temperature, pressure and the received analog, and control alarm or switch operation through the PLC operation. The computer system, not only can do the real-time monitoring parameters in the production process, and also can be part of parameters, in determining the permissions, manual modification. At t