基于fpga的mic总线控制器分析-机械电子工程专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the development of armored car and tank in military field, the real-time and reliability of signal processing and transmission control in the vehicle electrical system have become increasingly demanding. How to improve the quality and reliability of the vehicle power supply and distribution has become an important direction for electrical equipment management bus technology. In this paper, we use master-slave dual controller and dual bus redundancy technology to develop the bus communication module, which has important practical value in improving the real-time and reliability of data communication and control. We design and implement a design of MIC bus controller on PXI/PCI bus. The system module design includes the module circuit design, FPGA logic design, hardware and software design and system testing.In this paper, we focuses on the system hardware circuit and FPGA logic design.The core components of our design is a MIC-320GM and a FPGA. In this way, we simplify the circuit design of the hardware system.We utilize dual redundant backup and redundancy, which are master-slave dual controller and AB two-channel communication, to improve the fault tolerance of the bus communication module. We test the functionality and performance of the data transmission and control in the MIC bus through PXI/PCI bus.The test trials shows that the data communication and control have a good and reliable performance, have the communication redundancy capability. . Key words: PCI bus MIC bus FPGA III III 目 录 摘 要 I HYPERLINK \l _bookmark0 ABSTRACT II 1 绪 论 HYPERLINK \l _bookmark1 1.1 论文课题背景 1 HYPERLINK \l _bookmark2 1.2 总线技术的研究现状 2 HYPERLINK \l _bookmark3 1.3 本文内容安排 5 2 系统硬件设计 HYPERLINK \l _bookmark4 2.1 硬件系统总体规划 7 HYPERLINK \l _bookmark5 2.2 MIC 芯片控制电路设计 9 HYPERLINK \l _bookmark6 2.3 MIC 总线接口设计 10 HYPERLINK \l _bookmark7 2.4 PCI 接口模块设计 11 HYPERLINK \l _bookmark8 2.5 电源设计 16 HYPERLINK \l _bookmark9 2.6 PCB 电路设计