厚煤层群保护层开采卸压效果分析及在瓦斯抽采中的应用-矿业工程专业论文.docxVIP

内蒙古 内蒙古科技大学硕士学位论文 II II Abstract Coal and gas outburst is a complicated dynamic phenomenon, the coal mine is coal a kind of serious natural disasters, it seriously threatens the safety of mine production and safety of personnel. The protective layer is a regional mining of coal and gas outburst prevention measures most cost-effective. Coking coal company three levels and three stages after entering deep mining, upgrade for the outburst coal, according to coal seam conditions,determination of gas geology rule of basic parameters of gas test area of coal seam. Ultimately determine the 3 # coal seam mining as a protective layer, 4 #，5 # coal mining as conducted by a protective layer of coal and gas outburst regional conflict prevention measures. After the order to accurately grasp the overlying 3 # coal seam as a protective layer mining, to cover the protective effect of 4 #, 5 # coal seams and validation of the scope of protection, the need for deep mining conditions of investigation and verification, reasonable parameters for protection protective layer mining to provide scientific basis for coking coal company. In this paper, the thick coal seam group Shitanjing protective layer 3 # coal mining face Ⅲ 10303, analysis, numerical simulation strike, dip extent of relief, and other parameters affecting the scope of the theory, a comprehensive analysis of the use of these parameters to determine the appropriate scope of relief . Industrial test site through theory and simulation parameters are arranged after the protective layer protective layer mining effectiveness analysis relief holes and pressure relief gas drainage holes, to study the protective layer is a protective layer in the mining strike and dip direction of the relief effect, the scope of protection. Throughout the test area to choose the appropriate drilling site layout, the determination of the protective gas flow rate, gas content, permeability coefficient, and use the industrial analysis and adsor