基于amesim的泵车臂架液压系统建模及故障分析-机械工程专业论文.docxVIP

万方数据 万方数据 ABSTRACT With the development of China’s construction industry and engineering machinery, the concrete pump truck becomes more and more popular in large-scale construction plant. Meanwhile, as a high-tech product, its high cost cannot be ignored, and it’s difficult to find faults, which can lead to serious accidents. Especially, the hydraulic system of concrete pump truck, which is composed of many hydraulic components, is considerable complex, and hydraulic circuits interact with each other. As a result, faults occur more frequently. As a part of concrete pump truck’s hydraulic system, the hydraulic system of arm is fairly important. However, studies about fault diagnosis for hydraulic system of arm are few. Therefore, the significance of study about hydraulic system of arm is obvious. Basic steps of this study can be concluded as follow. Firstly, the thesis provides a brief introduction to the history of concrete pump truck’s development. Secondly, it describes the development process of fault diagnosis for hydraulic system. Thirdly, through comparisons from various sides, the method, which combines modeling and simulation of hydraulic system using AMESim with data analysis using neural network, is seen as a better choice. Fourthly, various hydraulic components, such as hydraulic pump, reversing valve, speed control valve, hydraulic cylinder, are modeled and simulated with AMESim. Fifthly, faults are considered in models，by simulation using AMESim, characteristic curves and data of all kinds of faults are obtained. At last, Taking A7VO pump as an example, with characteristic curves and data obtained, fault intelligent diagnosis can be achieved with neural network. This paper achieves modeling of hydraulic system using the way of system modeling and simulation, and finishes fault diagnosis using neural network. In conclusion, it offers a convenient, effective and feasible solution to fault intelligent diagnosis for the hydraulic system of concrete pump tr