单肋中承式钢拱桥的稳定性分析-工程力学专业论文.pdf.docxVIP

摘要 11 万方数据 AbstractAbstract Abstract Abstract As a pressure syStem，the carrying capacity of arch bridge will be affected by the stability．The stability problem of steel arch bridge with a single rib is more prominent because of its small lateral rigidity．Base on a half-through steel arch bridge with a single rib--Tianyuan Bridge in Xiamen City,the tmite element software ANSYS is used to analyze the stability of this arch bridge．The specific content of the research includes the following five aspects： (1)The calculation methods of critical buckling load of arch bridge includes practical calculation method and finite element calculation method which were used to analyze the stability of a parabola arch with fixed bearing in these paper．The advantages and disadvantages and the scope of application of these two types of calculation methods were summed up after the comparison of the calculation results． (2)Linear elastic stability was analyzed under 1 4 different load cases．obtaining the stability safety factors and instability modes to analyze the effect of different load arrangement on the stability of arch bridge．The full bridge uniform live load has the greatest effect on the stability of arch bridge，the full bridge partial load has the followed effect，and the cross-half partial load has the minimal effect．The effect of the wind load with the combination of lane load on the stability of arch bridge is almost negligible．The direction of the wind load has almost no effect on the stability of arch bridge． (3)The geometric nonlinear stability,the material nonlinear stability and the double nonlinear stability of this arch bridge were analyzed and the load-displacement curve was obtained．Compared with the results of the linear elastic stability analysis， the effect of geometric nonlinear factor and material nonlinear factor on stability of this arch bridge was analyzed (4)The bending stiffness of main girder,the bending stiffness of arch rib，derrick stiffness，selection o