结晶过程多相流多尺度耦合模型的验证与应用-化学工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 减小；各个区域晶体平均悬浮密度与过饱和度的总体分布情况在大部分区域变化趋势 减小；各个区域晶体平均悬浮密度与过饱和度的总体分布情况在大部分区域变化趋势 相同。随着进料晶体体积分数增大，器内晶体增多：迸料晶体体积分数对过饱和度分 布均匀性有一定程度影响。根据模型模拟的结果，考察和研究不同循环速率与不同进 料晶体体积分数下各个区域内晶体与过饱和度的分布规律，运用晶体生长理论合理解 释，所得结果符合流体动力学和结晶过程基本理论，验证了该结晶过程多相流多尺度 耦合模型的正确性，可用于指导结晶器设计和结晶过程分析。 关键词：工业结晶；计算流体力学；晶体粒度分布；多尺度；悬浮密度；耦合模 型 万方数据 ABSTRACTIndustrial ABSTRACT Industrial crystallization pIocess is usually happened with the crystals suspended，the nuid dyn锄ics characteristic as nuid now state aJld the suspension state of cUstals aJld the crystaUization kinetics fIactors jointly detennine the quality of the cD，stal products． Research proVes that in the same liqu主d field of continuous mold，di恐rent sizes of panicles have di仃．erent distribution，so the CSD is dimrent at difrerent locations of the mould．a11d me product crystal size prim撕1y depends on the discharge point CSD．So study on the CSD of dif诧rent position of continuous crystallization process crystallizer can provide a reference for contr01ling the crysta】1ization process and mold design． Most of the early Drstallization research adopted MSMPR model，a11d without considering nuid dynamics factors inside the crystaUizer，lead to large difrerence with practical indus仃ial crystaUization process．We must consider the both innuence of nuid dyn锄ics and crystallization dyn啪ics so as to reduce the difrerence．But because of the panicle’s nonlinear no、Ⅳ，uneven distribution and di丘brent nuid now states，no accurate crystal suspension density distribution can be obtained by experiment．CFD simulation technology is widely adopted in crystallization process，“can be used as a power如l tool for studying on the liquid now fleld a11d panicle state of suSpension of the c巧stallization．Our group established the multiphase now and multi—scale coupling model of crystallization according to the multi_scale distribution features of crystal inside the crystallizer．The model is Verifled and印plied in thjs pape r． The 0slo crystallizer adoped in This anicle is widely