交流复卷机退卷张力控制系统的研究控制科学与工程专业论文.docxVIP

构建了公共直流母线的供电方式，使能量能够反馈回电网。以宁夏某造纸厂 构建了公共直流母线的供电方式，使能量能够反馈回电网。以宁夏某造纸厂 原始数据及技术协议为例对退卷张力控制系统进行了硬件设计。根据原始数 据计算得到所需的电机参数值，完成对电机的选型，选择西门子6SE70逆 变器作为退纸辊电机的驱动单元，采用PROFIBUS．DP总线作为通讯方式， 以可编程逻辑控制器(Programmable Logic Controller，PLC)作为硬件核心， 采用操作屏进行数据给定及过程值显示以实现人机交互。总结PLC应完成 的编程控制任务，得到张力控制的主要流程，采用STEP7完成退卷张力控 制并给出丫部分程序。使用WinCC flexible软件对操作屏上监控画面进行了 编辑并完成操作屏与PLC的组态。 关键字：交流复卷机，退卷张力，模糊PID，公共直流母线 万方数据 RESEARCH RESEARCH oN UNWINDING TENSIoN CoNTRoL SYSTEM FoR AC REWINDER ABSTRACT Rewinding process is the last step of the papermaking processes，as the main controlled Variable．unwinding web tension iS the significant factor which affects the finished paper roll form in the rewinding process，the effects of unwinding web tension control directly determine the quality index of finished paper roll．In the paper industry,it has become a development trend that the AC drive will replace the DC drive．Compared with DC drive mode．the tension control system with AC drive has more obvious advantages．This paper takes the unwinding tension as the research object，aiming at the problems of multi．disturbance and nonlinear in the control system of unwinding tension，a complete set of control scheme is proposed，the fuzzy PID algorithm of rewinder tension control iS studied and its simulation iS carried out；the hardware structure of the main circuit of the system was designed to solve the problem of energy feedback from the AC drive system．111e system WaS designed by taking the original data of a paper rewinding project in Ningxia as an example．The main work could be summarized as the following four aspects： (1)Control requirements were proposed for unwinding tension，some common methods for tension control Was summarized．By the introduction of rewinding process，web tension as the main factor which affects the qual时of finished paper roll from，the control requirement of unwinding web tension Was summarized．Two common methods of tension control were analyzed，including the realization based on DC inventer and t