带暗支撑剪力墙及核心筒体非线性分析及性能研究结构工程专业论文.docxVIP

硕士学位论文Abstract 硕士学位论文 Abstract It is well known that the RC wall is a kind of horizontal load resistant systems．It is widely used in taU building for its good seismic perfomance．In the recent years how to improVIe the seismic behaVior of the shear wall is a hot topic in the field of seismic design．Professor Cao Wanlin(Beijing UniVersity of T．echn0109y)proposed a kind of RC shear wall with concealed bracing．The experiment results show that the setting of concealed bracings in the shear wall is 2lble to improVe seismic behaViors of the shear wan obviously．But it also is insumcient in the theoreticalresearch aspect of this new structure．The RC shear wan with concealed bracing is computed based on the element of concrete with dispersed reinforcement． This element is unable to renect concealed bracing’s contribution to energy dissipation of the shear wall．In this paper，theoretical analysis and design method research haVe been finished．In the paper，main contents and outcomes are listed as follow： Firstly，the software ANSYS is adopted to establish the elastic-plastic finite element analysis model for the RC shear wall．In this model，the element SOLID65 is used for simulating reinforced concrete， and the element PIPE20 is used for simulating concealed bracings．The discrete crack model is adopted t0 simulate concrete crack． The bilinear elastic-plastic model is adopted to simulate the stress-strain relationship of steel．The comparison between the calculational results 孤d the test indicates that the ANSYS can be success to analyse RC shear wall． Secondlyusing ANSYS，the nonlinear analysis of RC low-rise shear waU with concealed bracing and coupled shear wall with concealed bracing haVe been finished， the global stif．fness and its attenuation process，bearing capacity，ductility，energy dissipation and failure feature of structures haVe been presented．It is shown that the crossed reinforcing bars肌d concealed c01umns improVe the seismic perfb咖ance of RC shear waU．The mechanisms of R